Initial Setup Example; Overview; Creating A Vlan - ZyXEL Communications MES3500-24S User Manual

This chapter shows how to set up the Switch for an example network.

5.1 Overview

The following lists the configuration steps for the initial setup:
• Create a VLAN
• Set port VLAN ID
• Configure the Switch IP management address.

5.1.1 Creating a VLAN

VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can do this with
port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 1 as a member of VLAN 2.
Figure 23 Initial Setup Network Example: VLAN
Click Advanced Application > VLAN in the navigation panel and click the Static VLAN link.
1

Initial Setup Example

MES3500-24S/MGS3520 Series User's Guide
43
C
H A P T E R
5