Edit Dhcpv6 Client - ZyXEL Communications XMG1915 Series User Manual

Figure 108 SYSTEM > IPv6 > DHCPv6 Client Setup
The following table describes the labels in this screen.
Table 67 SYSTEM > IPv6 > DHCPv6 Client Setup
LABEL
Index
Interface
IA-NA
Rapid-Commit
DNS
Domain-List
Information
Refresh
Minimum
Edit

24.11.1 Edit DHCPv6 Client

Use this screen to configure the Switch's DHCP settings when it is acting as a DHCPv6 client. Select an
entry and click Edit in the SYSTEM > IPv6 > DHCPv6 Client Setup screen to display this screen.
Figure 109 SYSTEM > IPv6 > DHCPv6 Client Setup > Edit
Chapter 24 IPv6
DESCRIPTION
This is the interface index number.
This is the name of the IPv6 interface you created.
This field displays whether the Switch obtains a non-temporary IP address from the DHCPv6 server.
This field displays whether the Switch obtains information from the DHCPv6 server by a rapid two-
message exchange.
This field displays whether the Switch obtains DNS server IPv6 addresses from the DHCPv6 server.
This field displays whether the Switch obtains a list of domain names from the DHCP server.
This field displays the time interval (in seconds) at which the Switch exchanges other configuration
information with a DHCPv6 server again.
Select an entry's check box to select a specific entry.
Click Edit to edit the selected entry.
XMG1915 Series User's Guide
153