Table of Contents
Advertisement
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL
12.
Plug the Binder 120 Power Cord into the Binder 120 and into the
electrical wall outlet.
0312105A-SBR
CAUTION: The ends of the Interface Cable insert into the Interface
Connectors in only one direction.
13.
Insert one end of the Interface Cable into the Interface Connector
of the Binder 120 and the other end into the Interface Connector
of the host machine.
•
NOTE: The Output Tray of the host machine will adjust automatically
to its correct position ( if it is not already there).
0312106A-SBR
14.
Press the Binder 120 Power Switch to the On ( I ) position.
PREPARING THE BINDER 120 FOR ON-LINE AND OFF-LINE OPERATION
Align the notched portion of each end of the Interface Cable
with the notched portion of each Interface Connector.
3-23
Advertisement
Table of Contents
