Xerox Document Binder 120 Operator's Manual page 21

PROBLEM SOLVING
Locating and clearing a jam
Determining when a jam occurs in the Binder 120
Jam locator illustration
2A
1A
2B
7-2
This section describes how to determine when a jam occurs in the
Binder 120, illustrates the location of the jam clearance labels
affixed to the Binder 120, and outlines the procedures for clearing
jams.
When the Binder 120 experiences a jam, the following events will
occur:
?
?
?
?
Labels appear throughout the Binder 120 at the points where jams
can occur. These labels illustrate how to resolve the problem. The
illustration below shows the location of the various labels.
1B
2C
The Attention Lamp, if enabled, will flash every 15 seconds.
The Sound Tone, if enabled, will beep every 15 seconds.
A red light will light on the Mimic Display at the location of the
jam.
The Message Display will provide information about the jam.
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL
4B
4A
3C
3B
3A
0 312053B-SBR