Xerox Document Binder 120 Operator's Manual page 122

Cover Trays
2. In Use indicator (Red) This indicator lights when the Cover Tray contains covers, the tray is
3. Please Wait indicator (Amber) This indicator lights after you press the Unlock button and the Cover
4. Ready to Open indicator (Green) This indicator lights after you press the Unlock button and the
5. Cover Supply indicators These indicators provide you with the approximate percentage of
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL
The Binder 120 has two Cover Trays located on the front right side.
Each Cover Tray holds a cassette of specially designed Xerox
covers. When you select a Cover Tray from the Control Panel, the
Binder 120 uses the covers in the selected Cover Tray to bind the
books.
The Cover Tray Labels indicate how to control access to the Cover
Trays. The labels also indicate the cover supply levels. The Cover
Trays will not close if a cassette is not loaded.
Below is an illustration of the components of the Cover Tray Labels.
Descriptions of each of the components follow the illustration.
1. Unlock Button Press this button to unlock the Cover Tray. When a Cover Tray is
not in use or when the Cover Tray currently in use empties, the
Binder 120 will unlock the Cover Tray automatically for you.
currently selected, and the tray is locked and ready for operation.
Tray is in the process of unlocking. It also lights after you close the
Cover Tray or select a tray and the tray is in the process of raising to
the feed position.
unlock operation completes. The Cover Tray is then ready to be
opened. When the cassette in the Cover Tray currently in use
empties, this indicator lights automatically.
covers in the cassette. The range is one light lit (cassette is nearly
empty) to six lights lit (cassette is full). Each light represents
approximately 25 covers.
GETTING TO KNOW THE BINDER 120
2-9