Xerox Document Binder 120 Operator's Manual page 108

PREPARING THE BINDER 120 FOR ON-LINE AND OFF-LINE OPERATION
3-40
13. Squeeze the Control Grip and slide the Receiving Plate towards
the Binder 120 until it stops.
•
0312100A-SBR
WARNING: The Interface Module is somewhat heavy. Be careful
when lowering the Interface Module.
14. Squeeze the Interface Module Release Grip and lower the
Interface Module all the way down to the left side of the Binder
120.
15. Move the Binder 120 to the desired location.
0312101A-SBR
WARNING: If you are wearing open-toe shoes, be careful when
pressing the Lock Levers.
16. Lock at least two of the Binder 120 Casters by pressing with
your foot on the gray Lock Lever of the Casters.
The Receiving Plate will now be fully retracted.
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL