Xerox Document Binder 120 Operator's Manual page 106

PREPARING THE BINDER 120 FOR ON-LINE AND OFF-LINE OPERATION
3-38
b.
0312084A-SBR
9. For the Xerox 5680/5892, do the following:
•
0312103A-SBR
•
0 312104A-SBR
Xerox 5680/5892:
For the Xerox 5680/5892, disconnect the two parts of the
Spacer by removing the metal pin from the hole in the plastic
arm and positioning the plastic arm above the metal pin.
Squeeze the metal clip located underneath the inside edge
of the host machine Output Tray.
NOTE: A green label on the top surface of the Output Tray
denotes the location of the metal clip on the underside.
While squeezing the metal clip, move the Output Tray back
to the inner position.
NOTE: The Output Tray has two positions - inner and outer.
The inner position is used for normal operation of the host
machine The outer position is used when the host machine
is connected to the Binder 120. The distance between each
position is approximately 1/4 inch (6 mm). You will feel the
Output Tray click into place at each position.
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL