Table of Contents
Advertisement
Team Xerox support for service and supplies
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL
1.
The Xerox Document Binder 120 Operator Manual is for the use of
operators trained on the Binder 120 during machine installation. It
describes the operation and maintenance of the Binder 120 as an
automatic book-maker accessory to the Xerox 5100, 5800 family,
and 5680/5892 products or as a stand-alone, manual-feed book
maker. It accepts copy sets in either 8.5 by 11 inch (United States
and Canada) or A4 (Xerox Limited) sizes. It uses specially designed
Xerox covers to produce bound books.
Xerox has a professional team in place to help you if you have any
questions. You will need the following information when you call for
assistance:
Customer number:
___________________________________
Machine type:
Xerox Document Binder 120
Serial number:
___________________________________
Software version:
___________________________________
Host machine type:
___________________________________
Customer
Support
Representative:
___________________________________
The Binder 120 requires the use of specially designed Xerox covers.
The covers are contained in cassettes that have a capacity of 150
covers. A variety of standard and custom covers is available.
Contact your Sales Representative for more information.
Record the telephone numbers in the spaces below for quick
reference when you need to contact a member of Team Xerox
support.
Sales:
__________________________________________
Service:
__________________________________________
Supplies:
__________________________________________
Introduction
1-1
Advertisement
Table of Contents
