Xerox Document Binder 120 Operator's Manual page 67

PREPARING THE BINDER 120 FOR ON-LINE AND OFF-LINE OPERATION
3-50
9. Plug the Binder 120 Power Cord into the Binder 120 and into the
electrical wall outlet.
0312072B-SBR
10. Press the Binder 120 Power Switch to the On ( I ) position. Wait
for the "Binder warming up" message before proceding to the
next step.
CAUTION: The ends of the Interface Cable insert into the Interface
Connectors in only one direction.
11. Insert one end of the Interface Cable into the Interface Connector
of the Binder 120 and the other end into the Interface Connector
of the host machine.
•
NOTE: The Output Tray of the host machine will adjust
automatically to its correct position ( if it is not already there).
Align the notched portion of each end of the Interface Cable
with the notched portion of each Interface Connector.
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL