Selecting The Cover Supply - Xerox Document Binder 120 Operator's Manual

MAKING THE BOOKS

Selecting the cover supply

Xerox Document Binder 120
Xerox Document Binder 120
4-4
To select the cover supply, follow the procedure below.
1. Check the Cover Supply Contents Display on the Control Panel
of the Binder 120.
?
0312030A-SBR
2. Press and release the Cover Supply button on the Control Panel
of the Binder 120 until the green light to the left of the desired
selection lights.
?
?
?
0312031A-SBR
?
Determine the type, color, and spine width of the covers in
Cover Tray 1 and Cover Tray 2.
Use 1 to select Cover Tray 1.
Use 2 to select Cover Tray 2.
Use 1&2 to select Cover Tray 1 and Cover Tray 2. This
selection is applicable when you are running a large job and
both Cover Tray 1 and Cover Tray 2 have the same covers
loaded. The Binder 120 will feed from Cover Tray 1 first.
When Cover Tray 1 empties, the Binder 120 will
automatically begin feeding from Cover Tray 2. It will repeat
the process of switching from the full to the empty tray until
the job completes. This ensures that you will not lose any
valuable production time while you replace an empty
cassette.
NOTE: When using Cover Tray 1 and Cover Tray 2 together,
you must have the identical covers in both cover trays.
This means that the cover size, cover color and cover type
must be the same.
Use None to disable Cover Tray 1 and Cover Tray 2. This
selection is applicable to stand-by and off-line modes only.
When neither Cover Tray has the correct covers, you can
bypass the Cover Trays feature entirely and add the covers
manually using the Manual Feeder. The Binder 120 will use
only the covers that you insert manually with your copy
sets.
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL