Table of Contents
Advertisement
Manual operation without using the Cover Trays
Xerox Document Binder 120
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL
Use this procedure when the Binder 120 is in either stand-by or off-
line mode and you wish to insert the covers manually. Manual
insertion of covers is helpful when you are binding just a few books
and neither Cover Tray contains the correct covers. It eliminates the
effort of loading the correct cassettes into a Cover Tray.
1.
Select None from the Cover Supply section on the Control
Panel of the Binder 120.
0312031A-SBR
2.
Insert the copy set into the book cover according to the page
orientation, step a or step b.
a.
For portrait (vertical) page orientation, insert the copy set
so that the top page of your copy set faces the front of the
cover and the cover spine is to the left of the image on the
pages (as the word Xerox is shown in the figure).
MAKING THE BOOKS
4-13
Advertisement
Table of Contents
