Xerox Document Binder 120 Operator's Manual page 120

Interface Module
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL
The Interface Module is located on the left side of the Binder 120. It
is the physical link between the Binder 120 and the host machine. It
enables copy sets to feed from the host machine to the Binder 120
for automatic binding into books.
Below is an illustration of the major components of the Interface
Module.
View from left side of Binder 120
2
1
8
1. Interface Cable Connectors
2. Interface Module Release Grip
3. Pivot Area
4. Angle Registration Label
5. Interface Module Door
6. Alignment Bracket
7. Receiving Plate
8. Receiving Plate Control Grip
GETTING TO KNOW THE BINDER 120
3
4
5
6
7
0312005C-SBR
2-7