Xerox Document Binder 120 Operator's Manual page 129

Maintenance safety
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL
?
Switch off the Binder 120 Power Switch, disconnect the Power
Cord, and call a Xerox Service Representative when any of the
following conditions occur:
- The Power Cord or plug is damaged or frayed
- Liquid is spilled into the Binder 120
- The Binder 120 is exposed to water
- Any part of the Binder 120 is damaged.
?
Do not perform any maintenance procedure that is not described
in this Operator Manual or you have not been trained to do by a
Xerox Service Representative or Customer Support Engineer.
?
Do not remove any covers or guards that are attached with
screws. There are no parts that you can maintain or service
behind these covers.
?
Use the materials and supplies specifically designated for the
Binder 120. The use of supplies that are not approved may
cause poor performance and could create a dangerous
condition.
?
Use the supplies and cleaning materials only as directed in this
Operator Manual. Keep all of these materials out of the reach of
children.
INTRODUCTION
1-5