Xerox Document Binder 120 Operator's Manual page 78

PREPARING THE BINDER 120 FOR ON-LINE AND OFF-LINE OPERATION
Checklist for connecting to a Xerox 5100
3-10
Below is a checklist of the steps described in the preceding pages for
connecting to a Xerox 5100. Once you become thoroughly familiar
with the procedure, you may wish to use this checklist as a quick aid
when connecting to the host machine.
1. Press the Binder 120 Power Switch to the Off (O)position.
2. Unplug the Binder 120.
3. Raise the Interface Module to the triangle (s) position.
4. Move the Alignment Bracket out of storage to the triangle (s)
position.
5. Extend the Receiving Plate outward.
6. Rotate the Receiving Plate up as far as it will go.
7. Unlock the Binder 120 Casters.
8. Move the Binder 120 toward the host machine.
9. Plug in the Binder 120.
10. Connect the Interface Cable.
11. Press the Binder 120 Power Switch to the On (I) position.
12. Release the Retainer from storage.
13. Attach the Retainer to the Damper Arm on the host machine
Output Tray.
14. Align the Binder 120 with the host machine.
15. Rotate the Receiving Plate down until it rests on the Output Tray
of the host machine.
16. Lock the Binder 120 Casters.
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL