Cover Tray Currently In Use Empties; Cover Tray Not Currently In Use Is Empty - Xerox Document Binder 120 Operator's Manual

Table of Contents

Advertisement

MAKING THE BOOKS
4-6

Cover Tray currently in use empties

When the Cover Tray currently in use empties, the following will
occur:
?
The Sound Tone, if enabled, will beep twice.
?
The Message Display on the Control Panel of the Binder 120 will
advise you to "Add Covers to Tray X" (if you have selected
Cover Tray 1 and Cover Tray 2) or "Check Cover Supply in
Tray X" (if you have selected Cover Tray 1 or Cover Tray 2.
?
The green light to the left of the Cover Tray selection on the
Control Panel of the Binder 120 will flash.
?
The Cover Tray light on the Mimic Display will go on.
?
The Cover Tray will automatically unlock and the green Ready to
Open indicator light will go on.
?
The Supply Level indicator lights on the Cover Tray will go out.
?
The Binder 120 will stop accepting copy sets, but will continue
processing the books already in progress.
?
If you are in the on-line mode:
a.) For the Xerox 5680, 5892 or 5100, the host machine will
stop processing after completing the current set and
delivering it to the Output Tray.
b.) For the Xerox 5800, 5890 or 5895, the host machine may
stop before completing the set in progress.
NOTE: Before resuming production, you must replace the
empty cassette. You then must follow the procedure applicable
to the host machine. For the Xerox 5100, 5680 or 5892, press
the Manual Start button to process the set left in the Output
Tray of the host machine. Then follow the directions on the host
machine User Interface screen. For the Xerox 5800, 5890 or
5895, follow the directions on the host machine User Interface
screen.

Cover Tray not currently in use is empty

When the Cover Tray not currently in use is empty, the following will
occur:
?
The Message Display on the Control Panel of the Binder 120
will advise you to "Add Covers to Tray X" (if you have selected
Cover Tray 1 and Cover Tray 2) or "Check Cover Supply in
Tray X" (if you have selected Cover Tray 1 or Cover Tray 2.
?
The Cover Tray light on the Mimic Display will stay on.
?
The Cover Tray will remain unlocked and the green Ready to
Open indicator light will stay on.
?
The Supply Level indicator lights will remain unlit.
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL

Advertisement

Table of Contents
loading

Table of Contents