Xerox Document Binder 120 Operator's Manual page 107

XEROX DOCUMENT BINDER 120 OPERATOR MANUAL
10. Rotate the Receiving Plate down until it stops.
0312097A-SBR
11. Squeeze the Alignment Bracket Lever and move the Alignment
Bracket to the curved arrow symbol on the Alignment Bracket
Label.
•
NOTE: The Alignment Bracket has three positions. The
Alignment Bracket Label denotes each position by a symbol.
The triangle (s) symbol represents the position used for the
Xerox 5100, 5800, and 5895. It corresponds to the triangle
symbol on the Angle Registration Label. The diamond (u)
symbol represents the position used for the Xerox 5890 and
5680/5892. It corresponds to the diamond symbol on the Angle
Registration Label. The curved arrow symbol represents the
position used when the Binder 120 is in the stand-by or stand-
0312098A-SBR
alone mode and the Interface Module is all the way down. This
position allows the Alignment Bracket to be stored away.
12. Push the Alignment Bracket all the way in.
0312099A-SBR
PREPARING THE BINDER 120 FOR ON-LINE AND OFF-LINE OPERATION
The solid line next to the symbol should be even with the
arrow on the side of the Interface Module.
3-39