Xerox Document Binder 120 Operator's Manual page 124

Book path through the Binder 120
1. Manual Input Station In manual mode, the operator inserts the copy sets into the Manual
2. Auto Input Station In automatic mode, the host machine feeds the copy sets into the
3. Set Drive Station The Manual Input Station or Auto Input Station delivers the copy set
4. Book Drive Station If a Cover Tray has been selected, the cover is delivered to the Book
6. Vertical Transport The Vertical Transport elevates the book to the Output Tray of the
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL
The arrows in the illustration below show the movement of the copy
sets along the Binder 120 book path.
Feeder. The Manual Feeder delivers each copy set to the Manual
Input Station.
Interface Module of the Binder 120. The Interface Module delivers
each copy set to the Auto Input Station.
to the Set Drive Station where the copy set sheets are aligned.
Drive Station where the cover is held open. The Set Drive Station
feeds the copy set into the open cover in the Book Drive Station.
5. Binder Module The Book Drive Station delivers the book to the Binder Module. Heat
melts the glue in the cover spine to fuse the copy set sheets into the
cover. Cooling fans then cool the book. After this process, the book
is delivered to the Vertical Transport.
Binder 120.
7. Output Tray The Output Tray receives the bound books and stacks them until the
operator unloads them.
1
2
3
4
GETTING TO KNOW THE BINDER 120
7
6
5
0312009D-SBR
2-11