Table of Contents
Advertisement
Condition
Books not binding properly (e.g., too
many sheets for cover size).
Books are warped or have spine
damage.
XEROX DOCUMENT BINDER 120 OPERATOR MANUAL
Causes
Wrong cover size may have been
loaded into the cover cassette (i.e.,
the bar code on the cassette and the
contents of the cassette reflect
different cover sizes). This could
happen if you manually load covers
into the cassette.
The force of the ejection of the books
into the Output Tray causes damage
to the spine.
The doors of the Binder 120 were left
open too long during jam clearance.
Any books left waiting in the Binder
Module were damaged due to
overheating.
PROBLEM SOLVING
Suggested solutions
Load the correct cover size into the
cover cassette or load a different
cover cassette.
Empty the Output Tray more
frequently.
Close the Binder 120 doors
immediately after clearing a jam.
7-17
Advertisement
Table of Contents
