Always On Display; Pairing A Phone With Your Watch; Before Pairing A Phone; To Pair A Phone - Polar Electro Ignite 3 User Manual

The display has an ambient light sensor that automatically adjusts brightness to suit the ambient light in
your surroundings.

ALWAYS ON DISPLAY

You can choose whether you want the screen to dimly show the time or to turn off completely when it's inactive. By
default, the screen turns off completely. To change the setting, go to
Show time.
Please note that the always on
setting.
Always on display is disabled, when
To enable backlight always on during training: Swipe down from the top of the display to pull down the
settings menu. Tap the Backlight icon to select Always on or Automatic. With always on selected the watch display will
be illuminated throughout your training session. The backlight setting will default back to automatic after you finish
your training session.

PAIRING A PHONE WITH YOUR WATCH

Before you can pair a phone with your watch, you need to setup your watch in the Polar Flow web service or with the
Polar Flow mobile app as described in chapter
your watch has already been paired. If you did the setup with a computer and would like to use your watch with Polar
Flow app, please pair your watch and phone as follows:

Before pairing a phone:

download Flow app from the App Store or Google Play
l
make sure your phone has Bluetooth turned on, and airplane mode/flight mode is not turned on.
l
Android users: make sure location is enabled for the Polar Flow app in the phone's application settings.
l

To pair a phone:

1. On your phone, open the Flow app and sign in with your Polar account, which you have created when setting up
your watch.
Android users: If you have several Flow app compatible Polar devices in use, make sure you have
chosen Polar Ignite 3 as the active device in the Flow app. This way the Flow app knows to connect
to your watch. In the Flow app, go to
2. On your watch, press and hold the button in time mode OR go to
Pair and sync phone
3. Open Flow app and bring your watch close to phone
4. When the Bluetooth Pairing Request
on your phone matches the code shown on your watch.
5. Accept the Bluetooth pairing request on your phone.
6. Confirm the pin code on your watch.
7. Pairing done is displayed once the pairing is completed.

DELETE A PAIRING

To delete a pairing with a phone:
(Show time) selection will drain your battery much faster than the default
Do not disturb
Setting up your
and tap the display.
confirmation message appears on your phone, check that the code shown
General Settings
is switched on.
watch. If you did the setup for your watch with a phone,
Devices and choose Polar Ignite 3.
Settings > General settings > Pair and sync >
is displayed on your watch.
15
> Display always on and choose
Quick