17.4.21 Setting the Manual bartack parameters
Icon
17.4.22 Setting the Jog-Dial parameters
The electronic handwheel can be activated or deactivated.
Icon
17.4.23 Setting the Referencing parameters
After the machine was switched on, the stepper motors need to perform a reference run.
Depending on the setting, referencing can be performed automatically or by pressing the
pedal back all the way.
Icon
140
Menu items
Max. Speed
Speed limit in manual bartack
t Change
The waiting time at the turning points
(e.g. for a change of sewing direction) is
set at this point. A short waiting time
ensures consistent seam quality.
Menu items
Jog-Dial
Menu items
User start referencing manual
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020
Programming
Value range
• Value range
150 - 4000
• Value range
0 - 1000 [ms]
Value range
• Value range
On/Off
Value range
• Value range
On/Off