Working basis
3.4.1 Tilting the machine head
Cover
In order to access the components on the underside of the machine, you
must first tilt the machine head.
Fig. 6: Access to the underside of the machine
①
(1) - Locking mechanism
Tilting the machine head
To tilt the machine head:
1. Tilt the machine head as far as it will go.
Erecting the machine head
To erect the machine head:
1. Push the locking mechanism (1) up with one hand.
2. Erect the machine head using your other hand.
18
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020