Adjusting An Even Sewing Foot Stroke - DURKOPP ADLER D868 Service Instructions Manual

Sewing feet

10.2 Adjusting an even sewing foot stroke

Fig. 54: Adjusting an even sewing foot stroke (1)
(1) - Walking foot
Proper setting
Presser foot (2) and walking foot (1) are raised by the same height.
Fig. 55: Adjusting an even sewing foot stroke (2)
(3) - Screw
To set an even sewing foot stroke:
1. Switch off the machine.
2. Disassemble the arm cover ( p. 19).
3. Set the feed dog to the level of the throat plate.
4. Loosen the screw (3).
5. Lower presser foot (2) and walking foot (1) to the level of the throat
 The handwheel position is 90°.
6. Re-tighten the screw (3).
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020
①
②
plate.
(2) - Presser foot
③
69