Adjusting The Cutting Pressure - DURKOPP ADLER D868 Service Instructions Manual

13.5 Adjusting the cutting pressure

Fig. 71: Adjusting the cutting pressure
(1) - Screw
Proper setting
2 threads with the greatest strength used for sewing must be cut safely at
the same time with minimum pressure.
Disturbance
Disturbances caused by an incorrect setting:
• Increased knife wear if the cutting pressure is too great
• Problems during sewing on
• Problems in cutting the thread
To adjust the cutting pressure:
1. Turn the screw (1).
86
• Increase the cutting pressure: Turn screw (1) clockwise
• Reduce the cutting pressure: Turn screw (1) counterclockwise
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020
Thread trimmer (FA)
①