Working basis
3.4 Disassembling and assembling the covers
For many types of adjustment work, you will have to disassemble the
machine covers first in order to access the components.
This chapter describes how to disassemble and then assemble the individ-
ual covers again. The text for each type of adjustment work then specifies
only the cover that needs to be disassembled at that particular time.
Information
Always apply 1 Nm of tightening torque when tightening the screws that
are used to attach the covers.
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020
WARNING
Risk of injury from moving parts!
Crushing possible.
Move the machine to the service position or switch
the machine off before disassembling the covers.
WARNING
Risk of injury from sharp parts!
Puncture possible.
Move the machine to the service position or switch
the machine off before disassembling the covers.
17