17.8.1 Calibration
Various parameters need to be calibrated – they are listed in the table. A detailed descrip-
tion of the calibration is given after the table.
Icon
166
Menu item
Feed calibration
Material thickness detection
Edge guide
only visible if the 1-axis or the 2-axis
edge guide has been
activated p. 136
Edge Guide Height
only visible if the 2-axis edge guide has
been activated p. 136
Needle thread tension
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020
Programming
Explanation
p. 167
p. 168
p. 168
p. 169
p. 169