6.2 Setting the corner knife parameters
Fig. 80: Setting the corner knife parameters (1)
(1) - Knife support
(2) - Knife support
To set the corner knife parameters:
1. Open the menu Service > Machine test > Adjust and test
2. Enter the password: 25483.
The display switches to:
96
①
②
corner knife and press the button
(3) - Knife support
(4) - Knife support
( p. 306).
Service Instructions 745-35-10 B/745-35-10 F - 00.0 - 10/2017
Corner knife
④
③