Table of Contents
Advertisement
Programming
Icon
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020
Menu items
Mode
Setting defining which roller is supposed to
run.
Feeding method
only visible if option Top / Top + Bottom
has been selected under Mode
Start
only visible if the check box Feeding
method has been turned on
Stop
only visible if the check box Feeding
method has been turned on
Pressure
Set the puller pressure
Switch off
Always on
Value range
Not driven
Both rollers freewheel
passively; mechanical
coupling only.
Top
The upper roller runs
actively under power.
Top + Bottom
Both wheels run actively
under power.
continuous = even
transport
intermittent =
transport adapted to the
rhythm of the feed dog
Setting of the start and
stop angle under Start/
Stop has been adapted
to the machine.
The values should not
be changed
• Value range
0 - 359 [°]
Setting of the start and
stop angle under Start/
Stop has been adapted
to the machine.
The values should not
be changed
• Value range
0 - 359 [°]
• Value range
Yes/No/
No Pressure with HP
nd
(2
foot stroke)
• Value range
On/Off
• Value range
On/Off
133
Advertisement
Table of Contents
