Assembling And Disassembling The Feed Dog - DURKOPP ADLER D868 Service Instructions Manual

3. Loosen the screws (1).
4. Disassemble the throat plate (2).
5. Finish the service routine.
Assembling the throat plate
To assemble the throat plate:
1. Execute the service routine Feed dog > Position to needle
 The software is used to define the necessary presettings on
2. Insert the throat plate (2).
 Ensure that the nose (4) of the bobbin case (3) is in the cutout of
3. Tighten the screws (1).
4. Close the hook cover(s) ( p. 28).
5. Finish the service routine.

3.7 Assembling and disassembling the feed dog

Fig. 20: Assembling and disassembling the feed dog in a 1-needle machine (1)
(1) - Screw
30
For a 1-needle machine, the screws (1) are on the left side of
the throat plate (2) or the column.
For a 2-needle machine, the screws (1) are directly on top of
the throat plate (2).
( p. 14).
the machine.
the throat plate (2).
①
②
①
(2) - Cover
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020
Working basis