Table of Contents
Advertisement
Maintenance
Assembling and aligning the thread clamp
Fig. 135: Cleaning the thread clamp (2)
(1) - Spring
(2) - Screw
(3) - Thread clamp
To assemble the thread clamp and align it:
1. Slip the spring (1) onto the thread clamp (3).
2. Assemble the thread clamp (3).
3. Tighten the screw (2).
4. Loosen the threaded pin (5).
5. Press on the thread clamp (3) and align it at thread guides (7) and (6).
The thread is guided straight from thread guide (7) through the thread
6. Tighten the threaded pin (5).
18.5 Parts list
A parts list can be ordered from Dürkopp Adler. Or visit our website for
further information at:
www.duerkopp-adler.com
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020
①
⑤
②
Turn the thread clamp (3) to align it.
clamp (3) to thread guide (6).
③
(5) - Threaded pin
(6) - Thread guide
(7) - Thread guide
⑦
⑥
193
Advertisement
Table of Contents
