Disassembling And Assembling The Front Cover (Service Cover) - DURKOPP ADLER D868 Service Instructions Manual

3.4.3 Disassembling and assembling the front cover (service cover)

Fig. 8: Disassembling and assembling the front cover
(1) - Front cover
Disassembling the front cover
To disassemble the front cover:
1. Switch off the machine.
2. Loosen the screws (2).
3. Remove the front cover (1).
Assembling the front cover
To assemble the front cover:
1. Switching off the machine
2. Place the front cover (1).
3. Tighten the screws (2).
20
NOTICE
Property damage may occur!
Possible damage to the winder PCB.
If the winder PCB becomes damaged on account of a loose contact,
winding will no longer be possible.
Switch off the machine before assembling and disassembling the
front cover.
①
②
Make sure not to damage the thread lever.
②
(2) - Screws
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020
Working basis
②