User Management - DURKOPP ADLER D868 Service Instructions Manual

Programming

17.6.1 User Management

You can use User Management to create a new user and assign this user
a username and password.
The users Default Technician and Default User have been preset. While
they cannot be deleted, these users can be deactivated if necessary.
Fig. 106: User Management (1)
(1) - Roles
Defining roles
Fig. 107: User Management (2)
①
(1) - Roles
Information
New roles are derived from roles that already exist.
If, for instance, a role is derived from a Technician (default role), the new
role will initially have all of the same authorizations as the original role.
You will afterwards be able to adjust the authorizations for the new role
using the drop-down menu.
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020
①
②
(2) - Users
(3) - Drop-down menu
③
151