Sewing feet
Fig. 51: Adjusting the sewing foot lifting gear (1)
②
①
(1) - PCB
(2) - Plug
To set the lifting gear of the sewing foot:
1. Switch off the machine.
2. Disassemble the handwheel.
3. Disassemble the toothed belt cover ( p. 23).
4. Disassemble the arm cover ( p. 19).
5. Disassemble the front cover ( p. 20).
6. Pull the plug (2) off the PCB (1) (only on 2-needle machines).
7. Loosen all plugs from the PCB (1).
8. Remove the PCB (1) CAREFULLY.
66
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020