Table of Contents
Advertisement
Sewing feet
Checking the setting
To check the setting:
1. Set the sewing foot stroke to 3 in the seam program.
2. Press the Service Stop button.
3. Use a 3 mm allen key to check if the stroke is identical when the sewing
foot is at the top dead center.
4. Readjust if necessary.
10.3 Adjusting the sewing foot pressure and sewing foot lift
Fig. 56: Adjusting the sewing foot pressure and sewing foot lift (1)
①
(1) - Locking peg
To adjust the sewing foot pressure and the sewing foot lift:
1. Switch off the machine.
2. Disassemble the handwheel.
3. Disassemble the toothed belt cover ( p. 23).
4. Disassemble the motor cover ( p. 22).
5. Insert the locking peg (∅ 5 mm) (1).
70
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020
Advertisement
Table of Contents
