Table of Contents
Advertisement
Programming
Test Material Thickness Sensor sub-item
Use this sub-item to test the functionality of the material thickness sensor.
Fig. 123: Test Material Thickness Sensor sub-item
(1) - Signal quality
Parameter
To test the material thickness detection:
1. Open the menu Service > Multi test > Test Material
2. Lift the sewing feet.
3. Place the sewing material under the sewing feet.
4. Lift the sewing feet.
The signal quality (1) must display the value 1.
Service Instructions D868 M-TYPE DELTA - 00.0 - 06/2020
Signal quality
Height of the sewing foot lift
Sewing foot stroke
Sewing foot pressure
Speed
Needle thread tension
Thickness Sensor.
Description
Signal quality of the sensor
indicates the height of the sewing foot lift for
the current sewing material
indicates the sewing foot stroke for the current
sewing material
indicates the sewing foot pressure for the
current sewing material
indicates the set speed
indicates the needle thread tension for the
current sewing material
①
173
Advertisement
Table of Contents
