Recommended Sae Viscosity Number - Hyundai Staria US4 2021 Owner's Manual

Lubricant
Transfer case oil (4WD)
Fuel
Middle East includes Livia, Algeria, Iran, Morocco, Sudan, Tunisia, Egypt and India
Refer to the recommended SAE viscosity numbers on the next page.
*1 :
Engine oils labeled Energy Conserving Oil are now available. Along with other additional
*2 :
benefits, they contribute to fuel economy by reducing the amount of fuel necessary
to overcome engine friction. Often, these improvements are difficult to measure in
everyday driving, but in a year's time, they can offer significant cost and energy savings.
Requires < API SN PLUS (or above) Full synthetic> grade engine oil. If a lower grade
*3 :
engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine
oil filter must be replaced as indicated severe maintenance condition.
Requires <API SN PLUS (or above) or ACEA A5/B5 Full synthetic> grade engine oil. If a
*4 :
lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil
and engine oil filter must be replaced as indicated severe maintenance condition.
To maintain the best braking performance and ABS/ESC performance, we recommend
*5 :
that you use genuine brake fluid that conform to specifications.
If the front/rear differential is submerged, we recommend that you visit an authorized
*6 :
HYUNDAI dealer to replace the differential oil.

Recommended SAE viscosity number

CAUTION
Always be sure to clean the area around any filler plug, drain plug, or dipstick before
checking or draining any lubricant. This is especially important in dusty or sandy
areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick
areas will prevent dirt and grit from entering the engine and other mechanisms that
could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather
operating (engine start and engine oil flowability). Lower viscosity engine oils can
provide better fuel economy and cold weather performance, however, higher viscosity
engine oils are required for satisfactory lubrication in hot weather. Using oils of any
viscosity other than those recommended could result in engine damage.
Volume
HYPOID GEAR OIL API GL-
5, SAE 75W85
(0.74 ± 0.03
(SK HCT-5 GEAR OIL
US qt.)
75W85 OR EQUIVALENT)
Refer to "Fuel
(19.8 US gal.) requirements" in chapter 1.
02
Classification
2-19