Hyundai Staria US4 2021 Owner's Manual page 735

Headlamp (High/Low)
1. Engage the parking brake and turn off
the engine.
2. turn off the lamp.
3. Remove wheel guard clips (under the
front bumper : 4 pieces) by using a
flat-blade screwdriver.
4. Push the wheel guard aside and
remove the bulb socket by turning it
counterclockwise.
5. Flip the retaining spring to the side
and remove the connector.
6. Pull the bulb to separate it from the
connector.
7. Install a new bulb by inserting it into
the socket and rotating it until it locks
into place.
8. Push the socket into the assembly and
turn the socket clockwise.
9. Install the wheel guard in the reverse
order.
WARNING
OUS4091062 OUS4091062
• Handle halogen bulbs with care.
Halogen bulbs contain pressurized
gas that will produce flying pieces
of glass that could cause injuries if
broken.
• Wear eye protection when changing
a bulb. Allow the bulb to cool down
before handling it.
• Always handle them carefully, and
avoid scratches and abrasions. If
the bulbs are lit, avoid contact with
liquids.
• Never touch the glass with bare
hands. Residual oil may cause the
bulb to overheat and burst when lit.
• A bulb should be operated only when
OUS4091077L OUS4091077L
installed in a headlamp.
• If a bulb becomes damaged or
cracked, replace it immediately and
carefully dispose of it.
09
OLMB073042L OLMB073042L
9-75