Towing Hook - Hyundai Staria US4 2021 Owner's Manual

Emergency situations
When towing your vehicle in an
emergency without wheel dollies:
1. Release EPB before turning off the
engine.
2. Press the Engine Start/Stop button to
the OFF position.
3. Change the gear to N (Neutral) by
pressing the P release button (need to
remove cap-cover) while pressing the
brake pedal. For more details, refer to
"Automatic Transmission" section in
chapter 6.
4. Press the Engine Start/Stop button to
the ACC position.
CAUTION
Failure to shift the gear to N (Neutral)
may cause internal damage to the
transmission.

Towing hook

Front (Removable) Front (Removable)
1. Open the tailgate, and remove the
towing hook from the tool case.
2. Remove the hole cover.
• Push the lower part of the bumper
hole cover.
8-24
3. Install the towing hook by turning it
clockwise into the hole until it is fully
secured.
4. Remove the towing hook and install
the cover after use.
Rear Rear
NOTICE
Failure to properly tighten the towing
hook may result in vehicle damage and
deformation of related parts.
CAUTION
Make sure the towing hook is tighten
properly. If not, during towing the
towing hook may be thrown off the
vehicle resulting in serious injury or
accident.
OUS4081016 OUS4081016
OUS4081018 OUS4081018