Recommended Sae Viscosity Number - Hyundai Santa Cruz Owner's Manual

Recommended SAE Viscosity Number

CAUTION
Always be sure to clean the area around any filler plug, drain plug, or dipstick before
checking or draining any lubricant. This is especially important in dusty or sandy
areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick
areas will prevent dirt and grit from entering the engine and other mechanisms that
could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather
operating (engine start and engine oil flowability). Lower viscosity engine oils can
provide better fuel economy and cold weather performance, however, higher viscosity
engine oils are required for satisfactory lubrication in hot weather. Using oils of any
viscosity other than those recommended could result in engine damage.
When choosing an oil, consider the range of temperature your vehicle will be operated
in before the next oil change. Proceed to select the recommended oil viscosity from
the chart.
Temperature
Smartstream
G2.5 GDI
Engine Oil *
1
Smartstream
G2.5 T-GDI
Requires <API SN PLUS (or above) Full synthetic> grade engine oil. If a lower grade
*1 :
engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine
oil filter must be replaced as indicated for severe maintenance condition.
Temperature Range for SAE Viscosity Numbers
°C -30 -20
(°F) -10
An engine oil displaying this API Certification Mark conforms to
the international Lubricant Specification Advisory Committee
(ILSAC). It is recommended to only use engine oils that uphold
this API Certification Mark.
-10 0 10
0 20 40 60
0W-20
0W-30
02
20 30 40 50
80 100 120
2-13