Various Settings/Instrument Settings; Tol. Judg. (Pre-Set Tol.) - Konica Minolta CR-10 Plus Instruction Manual

Various Settings/Instrument Settings

Tol. Judg.
(Pre-set Tol.)
— Confi gure as necessary —
With this instrument, a tolerance width can be pre-confi gured as a default value
independently from color difference reference data.
Memo When "Tol. Judg." is not displayed in the menu, refer to page E-59 and turn the
setting "ON" in the Instrument Menu Customization settings.
1
Go to the <MENU> screen.
MENU/OK
2
Select "Tol. Judg." and confi rm.
MENU/OK
or 
3
Select "On" and confi rm.
MENU/OK
or 
"ΔE*≤" will be displayed as the color difference setting.
4
Move the selection frame to "ΔE*≤" and confi rm.
MENU/OK
or 
Once selected,  will appear on the display.
Instrument Menu Customization
Ver.1.00.0000
MENU
Back
Browse Data
Language
Avg. Meas.
Tol. Judg.
Mask Setting
Auto Off
Preset
Date/Time
USB Connec.
10:00
MENU
Back
Tol. Judg.
Off
On
10:00
Back
Tol. Judg.
Off
On
 display
* 1.0
5
Confi gure the tolerance, and confi rm.
MENU/OK
or 
Press to switch the values to ascending order, and
press to switch to descending order.
6
Go back to the <MENU> screen.
MENU/OK
7
Go back to the <Measurement> screen.
MENU/OK
<Measurement result display example when "Tol. Judg." is confi gured>
2.0
E* 1.4
L* -1.1
a* 0.0
STATUS
lamp
b* -0.8
When Tol. Judg. is OK
Buzzer sound: Beep
STATUS lamp: Green
Setting
Initial Setting Setting
● Off
0.1–99.9
On
(The setting can be confi gured to the fi rst decimal place.)
*
Tol. display
2.0
Target
87.9
L*
-0.6
a*
b * 2.9
10:00
2.0
E* 3.9
The tolerance of
"2.0" has been
exceeded so the
L* -3.5
item is highlighted.
a* 1.6
b* 0.4
When Tol. Judg. is NG
Buzzer sound: Beep beep
STATUS lamp: Orange
Setting
28
2.0
10:00
10:00