Panel Description - Delta ASDA-B3 Series User Manual

Test Operation and Panel Display

4.1 Panel description

4
(1) Display: 5-digit, 7-segment LED displays the monitoring values, parameters, and setting
values.
(2) MODE key: switches the display among Monitoring mode, Parameter mode, and Alarm
mode. In Editing mode, press the MODE key to switch back to Parameter mode.
(3) UP (▲) key: changes the monitoring code, parameter number, and value.
(4) CHARGE (Charge LED): the Charge LED indicator is on when the power is applied to the
circuit.
(5) DOWN (▼) key: changes the monitoring code, parameter number, and value.
(6) SHIFT key: in Parameter mode, press this key to change the group number. In Editing
mode, moving the flashing (selected) digit to the left lets you adjust the higher setting bit.
You can switch the display of high / low digits in Monitoring mode.
(7) SET key: displays and stores the parameter value. In Monitoring mode, pressing the SET
key switches between decimal and hexadecimal display. In Parameter mode, pressing the
SET key switches to Editing mode.
4-2
(1)
(2)
(3)
(4)
(5)
(6)
C
N
4
(7)
ASDA-B3