Mounting Directions And Precautions For The Servo Motor - Delta ASDA-B3 Series User Manual

ASDA-B3

2.4.2 Mounting directions and precautions for the servo motor

You can install the servo motor horizontally or vertically.
Mounting direction
Horizontal
Vertical - shaft end up
Vertical - shaft end down
Note: if you install gears on the servo motor, follow the manufacturer's instructions for installation.
If you are using a servo motor with an oil seal, refer to
Section 2.4.5 for oil and water prevention measures for the
servo motor.
 Do not operate the servo motor with oil seal in the vertical
direction.
 When wiring, install an oil trap (marked as (1) in the figure on
the left) to prevent vapor from entering the motor.
 When installing the servo motor in a machine (such as in a
gearbox), adhere to the measures in Section 2.4.5 to prevent
oil and gas from entering the servo motor.
( ) 1
If you are using a servo motor with an oil seal, refer to
Section 2.4.5 for oil and water prevention measures for the
servo motor.
Precautions
Installation
2
2-9