Installation - Delta ASDA-B3 Series User Manual

Installation

Follow the instructions in this chapter during installation. This chapter includes
information about the circuit breaker, fuse, EMI filter selection, and the regenerative
resistor.
2.1 Ambient storage conditions ·································································· 2-2
2.2 Ambient installation conditions······························································ 2-3
2.3 Mounting direction and space ······························································· 2-4
2.4 Safety precautions for using motors ······················································· 2-6
2.4.1 Troubleshooting for the motor operation and status ····························· 2-8
2.4.2 Mounting directions and precautions for the servo motor ······················ 2-9
2.4.3 Precautions for using servo motor with oil seal ································· 2-10
2.4.4 Precautions for using couplings ···················································· 2-10
2.4.5 Oil and water prevention measures for the servo motor ·······················2-11
2.4.6 Measures to suppress temperature increase of the servo motor ·········· 2-12
2.5 Specifications for the circuit breaker and fuse ········································ 2-13
2.6 Installation requirements for EMC ······················································· 2-14
2.6.1 EMI filters ················································································ 2-15
2.7 Selecting the regenerative resistor ······················································ 2-17
2.8 The use of braking ··········································································· 2-22
2
2-1