Chapter 4 Panel Display And Operation; Panel Description - Delta ASD-B2-1521-F User Manual

Chapter 4 Panel Display and
This chapter details the panel status and operation of ADSA-B2 series servo drive.

4.1 Panel Description

Name
Five-/Seven-segment display is for displaying the monitoring values,
Display
parameter values and setting values.
Charge LED The Charge LED lights to indicate the power is applied to the circuit.
MODE Key. Pressing MODE key can enter or exit different parameter
MODE Key groups, and switch among Monitor mode, Parameter mode and Alarm
Mode.
SHIFT Key. Pressing SHIFT key can scrolls through parameter groups.
After a parameter is selected and its value displayed, pressing SHIFT
SHIFT Key
key can move the cursor to the left and then change parameter settings
(blinking digits) by using arrow keys.
UP and DOWN arrow Key. Pressing the UP and DOWN arrow key can
UP and DOWN
scroll through and change monitor codes, parameter groups and various
Key
parameter settings.
SET Key. Pressing the SET key can display and save the parameter
groups, the various parameter settings. In monitor mode, pressing SET
SET Key
key can switch decimal or hexadecimal display. In parameter mode,
pressing SET key can enter into parameter setting mode.
Revision May, 2018
Operation
Function
4-1