Battery Box (Absolute Type) And Wiring; Specifications - Delta ASDA-B3 Series User Manual

ASDA-B3

10.1 Battery box (absolute type) and wiring

10.1.1 Specifications

Precautions
Carefully read through the following safety precautions. Use batteries only in accordance with
the specifications to avoid damage or dangerous conditions.








Battery specifications
International standard size
Maximum continuous discharge current
Part number for the battery with cable
Make sure the installation location is free of vapor, corrosive and
inflammable gas.
Correctly place the battery into the battery box to avoid short-circuiting.
Do not short-circuit the positive and negative electrodes of the battery,
and do not install the battery in reverse direction.
Do not mix new and used batteries to avoid losing power or shortening the life
of the new batteries. It is suggested to replace all batteries with new ones.
Follow the instructions when wiring the battery box to avoid dangerous
conditions.
Do not place the battery in a high-temperature environment over 100°C,
as this may cause a fire or an explosion.
The batteries are non-rechargeable. Do not charge the batteries as this
may result in an explosion.
Do not directly weld on the surface of the battery.
Item
Type
Standard voltage
Standard capacity
Maximum pulse current
Dimensions (D x H)
Weight
Operating temperature
Supplier
Li/SOCl2 Cylindrical Battery
ER14505
AA
3.6V
2700 mAh
100 mA
200 mA
14.5 x 50.5 mm
Approx. 19 g
-40 to +85°C
EVE Energy Co., Ltd
0991023281
Absolute System
10
10-3