3.16 Operation of setup / initialization screen
Here, explain the operation method of the following functions.
Initialization
(1)
(2)Operation .....................................Display the accumulation time of the power supply ON, and the remaining time
(3)Time ...............................................Display of the date and time, the setup
(4)Version..........................................Display the software version of the controller and the teaching pendant.
Press the [5] key in the menu screen, and display the set/initial screen.
<MENU>
1.FILE/EDIT
3.PARAM.
5.SET/INIT.
123
(1) Initialize the program
Delete all the programs.
1) Press the [1] key in the set/initial screen, and display the initial menu screen
<SET/INITIALIZE>
1.INITIALIZE
3.CLOCK
4.VERSION
123
2) Press the [1] key in the initial menu screen, and select the program.
Display the screen of confirmation.
<INITIALIZE>
1.DATA
2.PARAMETER
3.BATTERY
123
3) If it initializes, press the function key corresponding to "Yes". If it does not initialize, press the function key
corresponding to "no". The screen returns to initiali menu screen.
<INITIALIZE>
INITIALIZE PROGRAM.
OK?
Yes
123
............................1. Programs : Delete all the programs
2. Parameter: Return the parameter to the setup at the time of shipment.
3. Battery
of the battery.
2.RUN
4.ORIGIN/BRK
CLOSE
2.POWER
CLOSE
CLOSE
No
: Reset the expended hours of the battery.
<SET/INITIALIZE>
1.INITIALIZE
3.CLOCK
<INITIALIZE>
1.DATA
3.BATTERY
<INITIALIZE>
INITIALIZE PROGRAM.
OK?
Yes
<INITIALIZE>
1.DATA
3.BATTERY
Operation of setup / initialization screen
3Explanation of operation methods
2.POWER
4.VERSION
CLOSE
123
2.PARAMETER
CLOSE
123
No
123
2.PARAMETER
CLOSE
123
3-78