Creating A Program - Mitsubishi MELFA CR1D Instruction Manual

(2) Creating a program

The key operation in the case of inputting the program of the following and the three steps is shown.
1 Mov P1
2 Mov P2
3 End
1) Press the function key ([F3]) corresponding to "insertion" in the command edit screen.
<PROGRAM> 1
DELETE
EDIT
Step insertion [F3]
2) I nput of step number"1."
Press the [CHARACTER] key, set it in the number input mode and press the [1] key.
The space between step number and command is omissible.
<PROGRAM> 1
＿
Step number input [1]
3) I nput " Mov ."
Press the [CHARACTER] key, set it in the character input mode
Press the [MNO] ("M"),[ → ], [MNO]("o") 3 times, and [TUV]("v") 3 times in order.
<PROGRAM> 1
1
＿
Input "MOV" [CHARACTER] [MNO] [ → ] [MNO] [MNO] [MNO] [TUV] [TUV][TUV]
4) Input "P1."
Press the [SP](" space ")、 [PQRS] ("P") .
Press the [CHARACTER] key, set it in the number input mode and press the [1] key.
For the instruction word and the data which accompanies the command, the space is required.
<PROGRAM> 1
1MOV
＿
Input "P1" [SP] [PQRS] [CHARACTER] [1]
50%
⇒
123
INSERT TEACH
Ins
123 CLOSE
Ins
123 CLOSE
Ins
123 CLOSE
3Explanation of operation methods
<PROGRAM> 1
＿
123
<PROGRAM> 1
1
＿
123
<PROGRAM> 1
1MOV
＿
123
<PROGRAM> 1
1MOV P1
＿
123
Ins
CLOSE
Ins
CLOSE
Ins
CLOSE
Ins
CLOSE
Programming 3-30