Name Change Of The Program (Rename) - Mitsubishi MELFA CR1D Instruction Manual

(3)

Name change of the program (Rename)

1) Select the rename menu
Press the function key corresponding to the "Rename" by program list display. Display the rename
screenIf the "renaming" menu is not displayed, press and display the [FUNCTION] key.
<FILE/EDIT>
1 08-04-24 17:20:32
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
POSI. 123
EDIT
2) Specification of the program which changes the name.
In the parenthesis of the renaming source, the program name beforehand selected by the program list
screen is displayed. (The figure the program name "1") If it changes, move the cursor by the arrow key.
Into the parenthesis of the renaming destination, input the new program name and press the [EXE] key.
<PROGRAM RENAME>
SRC.NAME ( 1
DST.NAME ( 31
123
◇◆◇ The program name protected cannot be changed. ◇◆◇
The program name with which command protection is set up cannot be changed. Please execute after
removing command protection.
1/20 Rem 136320
22490
694
2208
1851
NEW COPY ⇒
)
)
CLOSE
<PROGRAM RENAME>
SRC.NAME ( 1
DST.NAME (
123
<FILE/EDIT> 1/ 20 Rem
2 08-04-24 14:56:08
3 08-04-24 13:05:54
4 08-04-24 13:05:54
31 08-04-24 17:20:32
EDIT POSI.
123 NEW
Operating the program control screen 3-54
3Explanation of operation methods
)
)
CLOSE
136320
694
2208
1851
22490
COPY ⇒