Input Register Monitor - Mitsubishi MELFA CR1D Instruction Manual

3Explanation of operation methods
7) Press the function key corresponding to "Close" in monitor menu screen is pressed, finish the monitor, and
return to the original screen.
<MONITOR>
1.INPUT
3.INPUT REG.
5.VARIABLE

(3) Input register monitor

If CC-Link is used, it is the function which always monitors the value of the input register.
Note） Since there is no CC-Link option in the CRnQ-700 series, this function can not be used.
1) Press the [3] key in the monitor menu screen, and display the input register screen. The input register of
the 4 registers can be monitored on the one screen.
<MONITOR>
1.INPUT
3.INPUT REG.
5.VARIABLE
123
The case where the state of the input register 8000 is confirmed is shown in the following.
2) Press the function key corresponding to "Number".
3) Set "8000" as the start number.
<INPUT REGISTER>
6000
6001
6002
6003
Prev
NUMBER
4) Display the ON/OFF state of the 4 input register at the head for the input register No. 8000.
<INPUT REGISTER>
8000 0 0×0000
8001 0 0×0000
8002 0 0×0000
8003 0 0×0000
Prev 123
NUMBER
Press the function key corresponding to "Next", then display the next input register screen. Press the function
key corresponding to "Prev", then display the previous input register screen.
Operating the monitor screen
3-67
2.OUTPUT
4.OUTPUT REG.
6.ERROR LOG
123
CLOSE
2.OUTPUT
4.OUTPUT REG.
6.ERROR LOG
CLOSE
0 0×0000
0 0×0000
0 0×0000
0 0×0000
123 CLOSE
Next
CLOSE
Next
<FILE/EDIT>
1
2
A1
B1
EDIT
<INPUT REGISTER>
6000
6001
6002
6003
NUMBER
<INPUT REGISTER>
START No. （_
<INPUT REGISTER>
Next [F3]
Previous [F2]
NUMBER
1/20 Rem 136320
08-04-24 17:20:32 22490
08-04-24 14:56:08
08-04-24 13:05:54 2208
08-04-24 13:05:54 1851
POSI. 123 NEW COPY
0 0×0000
0 0×0000
0 0×0000
0 0×0000
Prev 123 Next CLOSE
）
123
CLOSE
8004 0 0×0000
8005 0 0×0000
8006 0 0×0000
8007 0 0×0000
Prev 123 Next
694
⇒
CLOSE