Mitsubishi MELFA CR1D Instruction Manual page 156

4MELFA-BASIC IV
Variable
No
name
75 M_G
76 M_On
77 M_Off
78 M_Mode
Note1) Mechanism No. ............1 to 3, Specifies a mechanism number corresponding to the multitask processing function.
Slot No..........................1 to 32, Specifies a slot number corresponding to the multitask function.
Input No. .......................0 to 32767: (theoretical values). Specifies a bit number of an input signal.
Output No. ....................0 to 32767: (theoretical values). Specifies a bit number of an output signal.
Note2) R...................................Only reading is possible.
RW. ...............................Both reading and writing are possible.
4-143 Detailed specifications of MELFA-BASIC V
Array designation
Note1)
None Specific gravity constant (9.80665)
None 1 is always set
None 0 is always set
None Contains the status of the key switch of the
operation panel TEACH/AUTO(OP)/AUTO(Ext.)(1/
2/3)
Details
Attribute
Data type, Unit
Note2)
R Double-precision
real number type
R Integer type
R Integer type
R Integer type
Page
281
286
286
285