Selecting A Menu - Mitsubishi MELFA CR1D Instruction Manual

3Explanation of operation methods
Move the cursor to character"B", and input "M" and "Y" after pressing and deleting the [CLEAR] key.
<NEW PROGRAM>
PROGRAM NAME
( ABY
Correction of the input character [ ← ] [CLEAR] [MNO] [WXYZ] [WXYZ] [WXYZ]
I f the long pushing [CLEAR] key, all the data in the parenthesis can be deleted.

(3) Selecting a menu

A menu can be selected with either of the following two methods.
*Press the number key for the item to be selected.
*Move the cursor to the item to be selected, and press the [EXE] key.
How to select the Management/edit screen ("1. Management/edit") from the menu screen with each method
is shown below.
O/P
MODE
MANUAL AUTOMATIC
Display the MENU screen from the title screen.
MELFA CRnD-7xx
RV-6SDL
COPYRIGHT (C) 2008 MITSUBISHI ELEC
TRIC CORPORATION ALL RIGHTS RESE
RVED
*Press the number key method
<MENU>
1.FILE/EDIT 2.RUN
3.PARAM. 4.ORIGIN/BRK
5.SET/INIT.
123
*Use the arrow key method
<MENU>
1.FILE/EDIT 2.RUN
3.PARAM. 4.ORIGIN/BRK
5.SET/INIT.
123
Move the cursor - set
The same operations can be used on the other menu screens.
3-17 Operation of the teaching pendant menu screens
)
ABC
CLOSE
T/B
Rear of T/B
<MENU>
Ver. P2T
1.FILE/EDIT
3.PARAM.
5.SET/INIT.
123
<FILE/EDIT>
1 08-04-24 17:20:32
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
CLOSE
EDIT POSI.
<FILE/EDIT>
1 08-04-24 17:20:32
2 08-04-24 14:56:08
A1 08-04-24 13:05:54
B1 08-04-24 13:05:54
CLOSE
EDIT POSI.
[ ↑ ] [ ↓ ] [ ← ] [ → ] + EXE
<NEW PROGRAM>
PROGRAM NAME
(
1) Set the controller [MODE] switch to "MAN-
UAL".
Up ：DISABLE
Down：ENABLE
*Lighting
2) Set the T/B to "ENABLE".
3) Press one of the keys (example, [EXE] key)
while the <TITLE> screen is displayed.
2.RUN
The <MENU> screen will appear.
4.ORIGIN/BRK
CLOSE
1) Press the [1] key. The <Management/edit>
1/20 Rem 136320
screen will appear.
22490
694
2208
1851
123 NEW COPY ⇒
1) Press the arrow keys and move the cursor to
1/20 Rem 136320
22490
"1. Management/edit", and then press the
694
2208
[EXE] key. The <Management/edit> screen
1851
123 NEW COPY ⇒
will appear.
)
ABC
CLOSE